How Long Does It Take To Recone a Speaker?

image1

Written By: BOSS Editorial

Published: October 20, 2026

Reading Time: 4 minutes

Share this story
image1

Image Credit: DS-18

Audio enthusiasts know that a speaker failure rarely happens at a convenient time. It happens mid-demo when the crowd is waiting, and the music is supposed to be the main event. It happens the night before a road trip when the vehicle is packed, and there is no room for delays. In those moments, a lot rides on the question of how long it takes to recone a speaker.

For decades, the answer to that question has been “too long,” but a groundbreaking solution is finally here. DS18’s PROJECT360 mid-high speakers feature a modular, quick-replacement recone design built on the idea that a blown speaker shouldn’t have to mean days of downtime.

Why the traditional recone timeline often takes days

In a conventional recone, “rebuilding a speaker” isn’t a quick swap. The process begins by removing the speaker from the vehicle and disassembling its moving parts to determine what’s damaged. Before installing any new components, the technician must thoroughly clean the frame and magnetic gap because any debris or dust can cause the new voice coil to rub.

Much of the time involved comes down to precision. The voice coil must sit perfectly in the magnet’s gap, and the cone assembly must travel smoothly without rubbing or scraping. That being said, the biggest delays often come from factors around the bench work. Recone shops tend to have a backlog during show season, shipping delays often occur when the correct recone kit isn’t in stock, and the adhesives involved in the project typically require a full day to cure.

The real-world pressure in aftermarket car audio is that a demo schedule doesn’t wait. For many enthusiasts, high-output car audio performance fills the calendar between car shows, dealer activations, trade exhibitions, weekend meets, and long drives where the system is part of the experience. A single blown speaker can throw off system balance and force last-minute compromises that never sound quite right.

DS18’s Field Marketing Manager Rob Ferro, known to fans as “Mr. DS18” on the company’s YouTube channel, operates in those exact environments.

“Competitors know what it means to push their systems to the limit,” observes Ferro. “When you constantly stress that threshold, speaker failure is more a question of when than if. What matters in those moments is how quickly your system can recover.”

DS18 is already planning to expand the PROJECT360 Series to offer different types of speakers, as well, including mid-bass models.

DS18’s PROJECT360 is designed to make recone time feel like a pit stop

DS18’s PROJECT360 series was created around the philosophy of giving a speaker multiple lives by making recovery fast and repeatable. This patent-pending Rotating Recone Design completely changes how the recone process works for ‌car audio enthusiasts who run their equipment hard.

Instead of a traditional rebuild that relies on adhesives and extended bench time, the concept is modular, letting the user turn the assembly counterclockwise and lift the cone and motor structure out. After removing the damaged cone, the recone module can be replaced, and the speaker returns to service. It takes only seconds to rotate and lift out the old cone, then replace it with a new voice coil module and lock it in.

Product highlights from DS18’s PROJECT360 modular recone kit lineup

DS18’s PROJECT360 line is a competition-leaning pro-audio speaker series built around two variants: ferrite magnet models and upgraded neodymium models. The lineup is high-output and durability-focused, with power ratings from roughly 300W RMS up to 700W peak per speaker and a frequency response of approximately 90 to 17,000Hz.

The PROJECT360 84 (ferrite 8-inch) is the product line’s rugged workhorse. Its paper cone, 1.5-inch voice coil, cast basket, and copper terminals enable high efficiency and durability for loud midrange output. This is the practical, competition-ready choice for systems where the mids must play loud and clean without being the limiting point.

The PROJECT360 8N (neodymium 8-inch) delivers a performance step-up thanks to enhanced power handling and neodymium magnets. This model offers 350W RMS and 750W peak. The “neo” option is intended for buyers who want more output headroom and power density in the same general format. It’s a logical upgrade when a system is being pushed harder and the midrange needs to keep pace without changing the overall speaker size.

Both examples take advantage of DS18’s innovative recone-in-the-field concept, making this mid-high loudspeaker line ideal for builds that experience real-world stress, such as daily loud listening and competitive setups. Instead of treating a blown component as the end of the driver, this collection makes it a simple repair that anyone can do in seconds.

So, how long does it take to recone a speaker? Traditional reconing can involve hours of labor plus cure time, but the real timeline often stretches into days once scheduling and parts availability are factored in. PROJECT360, by contrast, is designed to make reconing feel more like a pit stop. In the world of demos and road trips, that difference in design is what determines whether a blown speaker becomes a minor interruption or a major schedule killer.