What Should Homeowners Know Before Hiring a Plumber for Major Repairs or Plumbing Upgrades?

Professional Plumber Repairing Kitchen Sink

Written By: BOSS Editorial

Published: October 26, 2026

Reading Time: 7 minutes

Share this story
Professional Plumber Repairing Kitchen Sink

Image Created with ChatGPT

A clogged sink is a quick call. A whole-house repipe, a sewer line replacement or a switch to a tankless water heater is a different kind of job. It can run into thousands of dollars, it often means opening walls or digging up the yard, and it usually needs a city permit and an inspection.

The plumber you pick for that work matters as much as the price. A good one finds the real cause, explains your options and leaves you with a system that lasts. A poor choice can mean a job that fails inspection, a bill that grows halfway through, or a repair that has to be done again.

Here’s what to check before you sign anything.

1. Know which jobs count as “major”

A simple test is whether the job needs a permit. In most California cities that includes:

  • Water heater replacement, tank or tankless
  • Repiping part or all of the house
  • Sewer line repair or replacement
  • New gas lines or gas line repair
  • Moving fixtures as part of a kitchen or bathroom remodel

Clearing a clog or swapping a faucet cartridge usually doesn’t need one. If the job is on the list above, treat the hiring decision with the same care you’d give a roofer or a general contractor.

2. Check the license before anything else

In California, plumbing work above a small dollar amount has to be done by a licensed contractor. Under the current rule, an unlicensed worker may only take jobs under $1,000, total, that need no permit and that they do alone (CSLB). Every job in the list above is outside that limit.

Look up the license number on the Contractors State License Board site. It takes a minute and shows whether the license is active, what classification it carries (C-36 is the plumbing license), and whether there are complaints or bond claims. While you’re there, confirm the contractor has workers’ compensation coverage if they have employees. If a worker is hurt on your property and the contractor isn’t covered, that problem can land on you.

3. Get a diagnosis before you get a price

For big jobs, a quote without a real diagnosis is a guess. Ask how the plumber will find out what’s wrong:

  • Sewer problems: a camera inspection of the line, ideally with a recording you can watch
  • Hidden leaks: electronic or acoustic leak detection, not exploratory holes in the wall
  • Low pressure or rusty water: a pressure test and a look at the pipe material
  • Water heater trouble: a check of the tank, valves and venting before recommending replacement

A plumber who wants to sell you a full replacement without showing you what failed is a reason to get a second opinion.

4. Ask for one written price for the whole job

Hourly billing works for small repairs. For a major job, a written flat price is easier to compare and protects you from a clock that keeps running. A fair quote lists the scope of work, the materials, permit costs as a separate line, the timeline, and what happens if the plumber finds something unexpected once the walls are open.

Some local companies build their whole process around this. Target Plumbing Services, which provides plumbing services in Orange County and Los Angeles, diagnoses the problem first and gives one written flat-rate price before any work starts. Whoever you hire, that’s the standard to ask for.

Get at least two quotes on any job that isn’t an emergency. If the prices are far apart, ask each plumber to walk you through their scope. The gap usually comes from different materials, a different repair method or something one of them left out.

5. Know the payment rules

California limits how much a contractor can ask for up front on a home improvement job. The down payment can’t be more than $1,000 or 10 percent of the contract price, whichever is less, and you should never sign a contract that asks for a progress payment larger than the work completed so far (CSLB).

A plumber asking for half the money before starting on a $12,000 repipe is breaking that rule. If the job is a stretch for your budget, ask about financing. Many established plumbing companies offer payment plans on large jobs, which is a far better option than a contractor who wants a big cash deposit.

6. Ask about every repair option, not just one

Most major plumbing problems have more than one fix, and the cheapest one up front isn’t always the cheapest over ten years. Ask the plumber to explain the trade-offs.

Sewer lines are a good example. A failed line used to mean digging a trench across the yard. Today many lines can be relined from the inside or replaced with trenchless pipe bursting, which pulls a new pipe through the path of the old one with only small access pits. The 5 Star Plumbing, a family-run company working in the Los Angeles area since 2006, offers both pipe liner installation and trenchless pipe bursting alongside traditional sewer repair, so homeowners can compare methods side by side.

The same thinking applies to repiping (copper or PEX), water heaters (tank or tankless) and water quality (a single filter or a whole-house system). A good plumber lays out the options and lets you choose.

7. Make sure the permit is in the plumber’s name

The licensed contractor doing the work should pull the permit and schedule the inspection. Be careful if a plumber suggests you pull an owner-builder permit yourself. That can shift legal responsibility for the work onto you.

Some upgrades come with California-specific requirements. Every new or replacement water heater has to be braced or strapped against earthquake motion under Health and Safety Code §19211. If your home’s water pressure is above 80 psi, the plumbing code calls for a pressure regulator. A plumber who knows these rules builds them into the quote instead of adding them later.

8. Get the warranty and the cleanup in writing

Ask two questions before work starts: what is covered and for how long, and who repairs the walls, floors or landscaping that get opened? Labor warranties, manufacturer warranties and wall repair are often handled separately. If drywall patching isn’t in the quote, you may end up hiring a second contractor to finish the job.

9. Plan for the day of the work

Major jobs usually mean the water, the gas or both are off for part of the day. Ask how long, and plan around it. For a repipe, ask whether the house will have water overnight. For a sewer job, ask how long you’ll need to avoid running water. Clear a path to the work area, and know where your main water shut-off is in case you need it before or after the visit.

Questions to ask before you sign

Print this list or keep it on your phone for the estimate visit:

  1. What is your CSLB license number, and do you carry workers’ comp?
  2. How did you diagnose the problem, and can you show me what you found?
  3. Is this a written flat price for the whole job?
  4. What other repair options are there, and why do you recommend this one?
  5. Will you pull the permit and schedule the inspection?
  6. What happens to the price if you find something unexpected?
  7. What does the warranty cover, and for how long?
  8. Who repairs walls, floors or landscaping after the work?
  9. How long will the water or gas be off?

The bottom line

A major plumbing job is a big decision, but it doesn’t have to be a stressful one. Check the license, insist on a diagnosis and a written price, stay within the payment rules and make sure the permit is in the plumber’s name. A plumber who answers every question on the list above clearly, without pressure, is usually the one who will do the job right.